-40%
Cisco WS-C4500X-16SFP+ Catalyst 4500-X Series 16 x 10G Port Switch (READ)
$ 395.99
- Description
- Size Guide
Description
Cisco WS-C4500X-16SFP+ Catalyst 4500-X Series 16 x 10G Port Switch (READ)Tested for key functions - Unit does not have fans and has a damaged power supply
Listing is for 1x switch
We were able to console into the unit to get show version but no further testing.
(1) Cisco WS-C4500X-16SFP+ Catalyst 4500-X Series 16x 10G Port Switch (READ)
Rommon (G) Signature verification PASSED
Rommon (P) Signature verification PASSED
FPGA (P) Signature verification PASSED
Rom Monitor (P) Version 15.0(1r)SG7
CPU Rev: 2.2, Board Rev: 4, Board Type: 108
CPLD Mobat Rev: 2.0x4377.0xb277
Chassis: WS-C4500X-16
MAC Address : 44-03-a7-e8-ed-bf
Ip Address : Not set.
Netmask : Not set.
Gateway : Not set.
TftpServer : Not set.
Non-Redundant system or peer not running IOS
System Uplinks & Linecards have been reset!!
***** The system will autoboot in 5 seconds *****
Type control-C to prevent autobooting.
. . . .
******** The system will autoboot now ********
config-register = 0x2101
Autobooting using the first file from bootflash.....
Loading image !!!!!!!!!!!!!!!!
Checking digital signature....
[bootflash:/cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG.bin]
Digitally Signed Release Software with key version A
Rommon reg: 0x00084F80
Reset2Reg: 0x00004200
Image load statu: 0x00000000
###
Winter 110 controller 0x046B54B6..0x0481E81D Size:0x002FDB9D Program Done!
##############
Linux version 2.6.24.4.96.70.k10 (susingh@build-lnx-036) (gcc version 4.2.1 p7 (Cisco c4.2.1-p7)) #1 SMP Wed Dec 5 03:42:58 PST 2012
Starting System Services
diagsk10-post version 5.1.4.0
prod: WS-C4500X-16 part: 73-13860-05 serial: JAE170306LY
Power-on-self-test for Module 1: WS-C4500X-16
CPU Subsystem Tests ...
seeprom: Pass
Traffic: L3 Loopback ...
Test Results: Pass
Traffic: L2 Loopback ...
Test Results: Pass
post done
Exiting to ios...
Starting IOS Services
Starting EOBC bridge eobcbr
Platform Manager: acquire hwlock chassis(1)
Platform Manager: starting in VSS mode
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.04.00.SG RELEASE SOFTWARE (fc3)
***********************************************************************
!!!! LESS THAN 4 FAN TRAYS INSTALLED. IF NOT RESOLVED BY INSTALLING AT LEAST 4 FAN TRAYS WITH THE SAME AIRFLOW TYPE (FrontToBack or BackToFront) WITHIN 0 MIN 30 SEC, THE CHASSIS WILL POWER DOWN. !!!!
***********************************************************************
We strive to be one of the best top sellers on eBay and our motto is to treat our customers how we would want to be treated. As you can see from our feedback rating, we go above and beyond to make our customers happy and are willing to take care of any issue you have in a speedy manner.
If you'd like to contact us, click contact seller link under seller information on the right side of this page
.
We greatly appreciate your business!
Shipping:
Shipping cost is dependent on seller's location. Insurance will be required on this item. FedEx Air/Ground and USPS shipping only. Please feel free to contact us via email for any further questions regarding this auction. Please include the item number in all correspondence.
Warranty:
30-DAY NON-DOA WARRANTY
Return/Refund Policy:
Any item we sell that is delivered in damaged container should be refused, and we are to be contacted immediately. Items that are received intact in the shipping container and appears not to be working properly when received buy the winning bidder ("Buyer) will be covered under the following terms:
1. Buyer must notify the seller within (7) days of receipt of the item of any problem that may require a return or refund.
2. The item will be returned to the seller at the Buyer's expense.
Shipping containers that have been compromised in any way during the shipping process will NOT be accepted and will be returned to the Sender. The sender would assume responsibility and need to pursue the issue with the shipping company.
3. The suspected DOA item will be tested to determine it's functionality. If the item is not working and there are no obvious signs of physical damage the winning bid and
ALL
shipping will be refunded to the Buyer. Items returned that are determined to be in working order, the Buyer will be charged a 15% restocking fee and NO shipping will be refunded.
We DO NOT cover the following conditions:
A Buyer's lack of knowledge, technical inexperience, or inability to configure, install and/or use the items purchased.
A Buyer's attempt to use the equipment purchased in a special configuration or application.
Payment:
Payment arrangements for this auction must be made within 3 days after the Auction closes. Acceptable forms of payment are:
PayPal, Credit Card, or Payment Upon Pick Up.