Dell PowerConnect 7048R 48-Port Gigabit Ethernet Managed Layer 3 Switch Dual PSU

Description

TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
This unit has been factory reset, view console log for more info. Please note, both handles are missing from the power supplies, as shown in photos.
COMPONENTS INCLUDED IN THIS AUCTION:
• (1) - DELL POWERCONNECT 7048R 48-PORT GIGABIT ETHERNET MANAGED NETWORK LAYER 3 SWITCH 4-PORT SFP
• (2) - DELL DELTA 0C220M 300W POWER SUPPLY DPSN-300DB-C
• (2) - POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:
When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:
The following is the Console Log from this item:
Boot Menu 4.1.0.19
CPU Card ID: 0x508548
CFI Probe: Found 2x16 devices in x16 mode
/DskVol// - disk check in progress ...
/DskVol// - Volume is OK
volume descriptor ptr (pVolDesc): 0x814ded0
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
volume options:
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: NO LABEL ; (in boot sector: )
- volume Id: 0xbb
- total number of sectors: 124,408
- bytes per sector: 512
- # of sectors per cluster: 4
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 122
- # of FAT table copies: 2
- # of hidden sectors: 8
- first cluster is in sector # 260
- Update last access date for open-read-close = FALSE
Boot Menu 4.1.0.19
Select an option. If no selection in 10 seconds then
operational code will start.
1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):
Operational Code Date: Mon Aug 8 04:04:22 2011
Uncompressing.....
Bulk Class Driver Successfully Initialized
Adding 0 symbols for standalone.
CFI Probe: Found 2x16 devices in x16 mode
volume descriptor ptr (pVolDesc): 0x5150410
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
volume options:
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: NO LABEL ; (in boot sector: )
- volume Id: 0xbb
- total number of sectors: 124,408
- bytes per sector: 512
- # of sectors per cluster: 4
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 122
- # of FAT table copies: 2
- # of hidden sectors: 8
- first cluster is in sector # 260
- Update last access date for open-read-close = FALSE
PCI unit 0: Dev 0xb634, Rev 0x11, Chip BCM56634_B0, Driver BCM56634_B0
SOC unit 0 attached to PCI device BCM56634_B0
soc_reset_bcm56634_a0: TCAM PLL not locked.
Adding BCM transport pointers
Configuring CPUTRANS TX
Configuring CPUTRANS RX
Instantiating /download as rawFs, device = 0x20001
Formatting /download for DOSFS
Instantiating /download as rawFs, device = 0x20001
Formatting...OK.
<186> JUL 14 06:08:46 0.0.0.0-1 General[1073741072]: bootos.c(220) 1 %% Event(0x
aaaaaaaa)
Instantiating RamCP: as rawFs, device = 0x30001
Formatting RamCP: for DOSFS
Instantiating RamCP: as rawFs, device = 0x30001
Formatting...OK.
(Unit 1 - Waiting to select management unit)>USB Auto Configuration process is c
ompleted!
Applying Global configuration, please wait ...
Welcome to Dell Easy Setup Wizard
The setup wizard guides you through the initial switch configuration, and
gets you up and running as quickly as possible. You can skip the setup
wizard, and enter CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard within 60 seconds,
otherwise the system will continue with normal operation using the default
system configuration. Note: You can exit the setup wizard at any point
by entering [ctrl+z].
Would you like to run the setup wizard (you must answer this question within
60 seconds)? [Y/N] n
Thank you for using the Dell Easy Setup Wizard. You will now enter CLI mode.
Applying Interface configuration, please wait ...
console>en
console#show ver
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
unit image1 image2 current-active next-active
----- ------------ ------------ ----------------- -----------------
1 4.0.0.6 4.1.0.19 image2 image2
console#show system
System Description: Dell Ethernet Switch
System Up Time: 0 days, 00h:01m:44s
System Contact:
System Name:
System Location:
Burned In MAC Address: D067.E56B.06FD
System Object ID: 1.3.6.1.4.1.674.10895.3039
System Model ID: PCT7048R
Machine Type: PowerConnect 7048R
Temperature Sensors:
Unit Description Temperature Status
(Celsius)
---- ----------- ----------- ------
1 MAC 35 Good
1 PHY 30 Good
Fans:
Unit Description Status
---- ----------- ------
1 Fan 1 OK
1 Fan 2 OK
--More-- or (q)uit
Power Supplies:
Unit Description Status Average Current Since
Power Power Date/Time
(Watts) (Watts)
---- ----------- ----------- ---------- -------- -------------------
1 System OK 61.8 67.0
1 Main OK 36.8 39.8 07/14/2021 06:09:35
1 Secondary OK 25.1 27.1 07/14/2021 06:09:35
USB Status:
-----------
Not Present
console#
Please Click Here to Visit Our Store
SearchBy12 -
231137
| Loc: ZJACK | L: Jack | T:
| PM: Nick
| QTY: 0 | Plan: 50/50 NET of FEES | 22.00"x21.00"x5.00" 32.00lbs | Start: 9.99 | BIN: {{detail_product_description}}.00 |  | 7/15/2021 |
|
51268