DSLRKIT 8 Ports 6 PoE Switch Injector Power Over Ethernet without Power Adapter

Description

Notice!Notice!Notice!
This item do not include the power adapter,  you need to buy an extra power adapter according to your requirement. So it only suitable for PoE professional customers.
52V Power adapter links:
52V1.85A
http://www.ebay.com/itm/201863649634
52V2.7A
http://www.ebay.com/itm/192137824001
48V Power adapter links:
48V2A
http://www.ebay.com/itm/191880113415
48V3A
http://www.ebay.com/itm/201384084416
Please select the correct Power adapter by POE device，
802.3af (802.3at Type 1) PoE device, We suggest DC 44V-57V power adapter.
802.3at Type 2 PoE+(plus) device, We suggest DC50V-57V power adapter.
Please refer to the Wikipedia "Power over Ethernet" section, under the "Standard implementation" paragraph.
(Usually for ensure the power supply is stable for a long time. it is recommended not to let the power load exceeds 80% of nominal value. so please choose a more suitable power adapter according to the number of camera you intend to connect and the total power. For example, you intend to connect 6 cameras, while each camera power consumption is 12Watt, the total power consumption is 6x12=72watt. Then select the 96Watt (48V2A) power adapter is enough. if the total power consumption is over 80watt then it is recommended to choose 144W (48V3A) power adapter.)
If your camera is with word “12V/PoE” as this picture shows, then please select 48V Power Adapter, do not select 12V Power Adapter.
Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V PoE Ethernet port:
DSLRKIT PMID6P2U Passive PoE Injector Switch
Power supply not included
Supports 9~55V DC power supply
DC IN port 5.5X2.5mm, inside positive (+)  outside  negative (-)
8 Ports (2Uplink, 6 PoE) 10/100Mbps
Midspan Mode-B Unsolicited Power(4,5+/7,8-)
Wall Mount
This is an Passive Power Over Ethernet of 8 port 10 / 100Mbps-T Ethernet switches, including 6 unsolicited PoE Ethernet ports and 1 Uplink ports. DC port apply 9~55V power supply adapter(not included), any one of the 6 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because  "Power Link 3~8" port using 4,5,7,8 pin as power transfer, Please
do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 3~8" port, this will damage your device.
Gigabit(1000Mbps)
ethernet device
Please do not access "Power Link port" this will damage your device.
Features:
8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 6-Ports PoE function
Midspan Mode-B Unsolicited Power(4,5+/7,8-)
Supports 9~55V DC power supply
Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
Full/half duplex transfer mode for each port.
Specification:
ALL Port:
Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable
。
Power Link Port 3-8-:
any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs)
Power LED
LED ON: power on. LED OUT: power off
LED Light LINK/ACT
LED ON Indicates the port is connected to a network device and has been started
LED OFF Indicates that this port is not connected to a network device or has not been started
Standard
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full-Duplex flow control
Protocol
CSMA/CD Ethernet
Data Transfer Rate
Ethernet: 10Mbps (Half Duplex)
，
20Mbps (Full Duplex)
Fast Ethernet: 100Mbps (Half Duplex)
，
200Mbps (Full Duplex)
IC Chips
IC Plus IP178G
Network Media(Cable)
10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
PoE Power on RJ45
Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8
DC Output: 9-55V, Per port Max 1A,
Number of Ports
8 x 10/100Mbps Auto-Negotiation RJ45 ports with 6 PoE enabled (port-3 ~ port-8)
Power Input
Supports INPUT 9-55V DC power supply
Power DC port 5.5 x 2.1mm,
inside positive (+)  outside  negative (-)
Power Consumption
3.2 Watts (max. no PD connected)
According to the actual power consumption of equipment
Temperature
Operation Temperature:0 ~40
℃
(32 ~104
℉
)
Storage Temperature: -40 ~70
℃
(-40 ~158
℉
)
Humidity
Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing
Product Dimensions
125mm W x 68mm D x 32mm H
RAM Register Capacity
64K bytes per device
MAC Address List
1K entries per device
Frame Forward Rate
10Mbps Ethernet: 14880pps/Port
Item Included:
DSLRKIT PMID6P2U 8pots 6PoE Passive PoE switch x1
(Power supply not included)