Juniper Networks EX3300-48T 48 Port Gigabit 4x 10GbE SPF+ Ports Switch QTY Avail

Description

This is a Juniper Networks EX3300-48T 48-Port Switch.  I have several of these.  All were pulled from working environments for a major system upgrade.  All are in great shape, and fully guaranteed.  ONE PER BID.
Juniper Networks EX Series Ethernet Switches provide scalable connectivity for the enterprise market, including branch offices, campus locations, and data centers. The switches run the Juniper Networks Junos operating system (Junos OS), which provides Layer 2 and Layer 3 switching, routing, and security services. The same Junos OS code base that runs on EX Series switches also runs on all Juniper Networks M Series, MX Series, and T Series routers and SRX Series services gateways.
Juniper Networks EX3300 Ethernet Switches provide connectivity for low-density environments.
EX3300 Switches First View
EX3300 switches provide:
Either 24 or 48 built-in network ports with 10/100/1000BASE-T Gigabit Ethernet connectors (ports labeled 0 through 23 or 0 through 47)
Four uplink ports (ports labeled 0 through 3)
Uplink Ports
Each EX3300 switch has four autosensing uplink ports. You can use the uplink ports on the switch to:
Connect an access switch to a distribution switch
Interconnect member switches of a Virtual Chassis
The uplink ports labeled 0 and 1 (interfaces
ge-0/1/0
and
ge-0/1/1
or
xe-0/1/0
and
xe-0/1/1
) are configured by default as network ports. To use uplink ports 0 and 1 to interconnect Virtual Chassis members, you must configure them as Virtual Chassis ports (VCPs).
The uplink ports labeled 2 and 3 (interfaces
ge-0/1/2
and
ge-0/1/3
or
xe-0/1/2
and
xe-0/1/3
) are configured by default as VCPs. You can use these uplink ports to interconnect Virtual Chassis members. To use uplink ports 2 and 3 as network ports, you must configure them as network ports.
The uplink ports support SFP and SFP+ transceivers.
Shipping in the USA is