-40%
Mellanox MSX6012-2BFS SX6012 EMC 100-886-236-00 12-port switch with EMC OS
$ 62.83
- Description
- Size Guide
Description
Mellanox SX6012 12-port switch.The switch was manuafctured for EMC and is running their OS.
It is NOT running Mellanox OS.
If you need a switch that runs Mellanox OS, do not buy this switch!
It looks like EMC OS has a lot of different commands and utilities.
Below is the boot-up snapshot.
This is just a sample output, we have a couple of the switches so the output may not be from the switch you are buying.
However, it will have the same - EMC ONLY - compatibility.
The switch has 2 power supplies.
It is possible to upgrade this switch to MLNOS but it is long and tortured road, I don't advise going that way.
P.S. Please note - shipping charge includes handling and preparation and is not negotiable.
It's not just the cost of postage, there are other components to the shipping charge.
=====================================================================================
U-Boot 2009.01 SX_PPC_M460EX SX_3.2.0330-82-EMC ppc (Feb 27 2013 - 12:13:42)
CPU: AMCC PowerPC 460EX Rev. B at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz)
Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter disabled
32 kB I-Cache 32 kB D-Cache
Board: Mellanox PPC460EX Board
FDEF: No
I2C: ready
DRAM: Auto calibration - _\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-___________________ __________________ECC generation -________________ ________________ 2 GB (ECC enabled, 333 MHz, CL3)
FLASH: 16 MB
NAND: 1024 MiB
PCI: Bus Dev VenId DevId Class Int
PCIE0: link is not up.
PCIE1: successfully set as root-complex
01 00 15b3 c738 0c06 00
Net: ppc_4xx_eth0, ppc_4xx_eth1
Hit any key to stop autoboot: 15 ___14 ___13 ___12 ___11 ___10 ___ 9 ___ 8 ___ 7 ___ 6 ___ 5 ___ 4 ___ 3 ___ 2 ___ 1 ___ 0
Waiting for PHY auto negotiation to complete...... TIMEOUT !
done
ENET Speed is 10 Mbps - HALF duplex connection (EMAC0)
Using ppc_4xx_eth0 device
ping failed; host 172.17.255.252 is not alive
Loading Kernel Image ... OK
ABCDEFdrv_table_install: _[01;34m syslog_[m at 0x00034080 with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: _[01;34m isrlog_[m at 0x00034080 with minor 1 (DRV_INIT)
drv_table_install: _[01;34m userinterface_[m at 0x00004db0 with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: _[01;34m stty0_[m at 0x0006eb7c with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: _[01;34m eth0_[m at 0x0006f50c with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: _[01;34m i2c0_[m at 0x0007a114 with minor 0 (DRV_SETUP) (DRV_INIT)
drv_table_install: _[01;34m i2c1_[m at 0x0007a114 with minor 1 (DRV_INIT)
drv_table_install: _[01;34m itcpip_[m at 0x0003c400 with minor 0tcpipInit: Starting internal TCP/IP stack.
(DRV_SETUP) (DRV_INIT)
kernel_main: Drivers installed, installing INIT process with stack size = 8192.
Bar [ 0 ] is the first memory bar
sk_init_main: Starting process based initialization - 8590.
02:60:48:10:ff:78 UDP socket 3 created
TCP socket 4 created
sk_init_main: Process based initialization complete - 8590.
sk_init_main: Installing task table.
task_table_install: _[01;34m console_[m at 0x00015ca4 stack 0x00452410/26624 : 4
task_table_install: _[01;34m inetd_[m at 0x00035c9c stack 0x00472c10/8192 : 5
task_table_install: _[01;34m poll_cqs_[m at 0x000aa98c stack 0x00458c10/8192 : 6
task_table_install: _[01;34m poll_ports_[m at 0x000aaac4 stack 0x0045ac10/8192 : 7
task_table_install: _[01;34m env_mon_[m at 0x000832f4 stack 0x0045ec10/8192 : 8
task_table_install: _[01;34m env_bin_api_[m at 0x00014420 stack 0x00460c10/8192 : 9
task_table_install: _[01;34mincoming_fw_files_[m at 0x00013e84 stack 0x00462c10/8192 : 10
task_table_install: _[01;34mincoming_fw_files_[m at 0x00013e84 stack 0x00464c10/8192 : 11
sk_init_main: Task table installed. Starting tasks and exiting.
_[1;36m----------------------------- Board Info -----------------------------_[m
_[1;33m* Chasis Type :_[1;32m DINGO_[m
_[1;33m* Number of Ports :_[1;32m 12_[m
_[1;33m* U-Boot Revision :_[1;32m 3.2.330_[m
_[1;33m* Firmware Revision :_[1;32m 9.9.1030_[m
_[1;33m* INI file Revision :_[1;32m 0x31010009_[m
_[1;33m* SwitchOS Revision :_[1;32m 1.297_[m
_[1;33m* SwitchOS Build Date :_[1;32m 2013-08-02_[m
_[1;33m* SwitchOS Build Time :_[1;32m 16:34:58_[m
_[1;33m* SwitchOS Build Path :_[1;32m /emc/tdowning/ppc460_release/aug_02_2013_[m
_[1;36m----------------------------------------------------------------------_[m
17:56:05 10/30/2015
Switch-B(4)> ?
?: Command not found.
Switch-B(4)> help
Command Description Syntax
-------------- ------------------------- ------
sched sched sched
piecnt piecnt piecnt
alarm alarm alarm
ps list processes ps
pdump pdump pdump
stack_trace stack trace stack_trace
lastrun Task/ISR/sched last run h lastrun
syslog syslog display syslog
isrlog isrlog display isrlog
spinlocks spinlocks display spinlocks
log user log display log
rwlocks rwlocks display rwlocks
genstackerr generate a 93FF genstackerr
generrtasks save err tasks info generrtasks
findstack find proc from stack findstack
setblockedticks set max blocked ticks setblockedticks
region Time entreg/lvreg calls region
lock Time getlock/releselock c lock
sema Time sempend/sempost call sema
kill signal thread kill
exit exit exit
help help help
start start start
tracef tracef tracef
trace trace trace
dump dump memory dump
dm dump memory dm
poke poke memory poke
pm patch memory pm
sems sems sems
fds Show active file descript fds
ipcq ipcq ipcq
cycles cycles cycles
eihdlrs eihdlrs eihdlrs
profile profile profile
proc proc proc
uptime uptime uptime
ttytest ttytest ttytest
baud baud baud
sread open and read device sread [flush]
lsreset long slice reset lsreset [pid]
drivers Show installed drivers drivers
reload Do reboot reload
reboot Do reboot reboot FORCE
hreset Do hard reset hreset FORCE
pci_conf Do PCI Config pci_conf
pci_probe Do PCI Probe for device pci_probe vendor device startslot
trypcie try PCI Config trypcie
tryrwbar try RW Bar tryrwbar
searchfw search firmware searchfw
tlbs show tlbs tlbs
mung mung tlb mung tlb
mcds Machine Check Disable Machine Check Disable
mcen Machine Check Enable Machine Check Enable
getdcr Get DCR Get DCR
setdcr Set DCR Set DCR
queryboard Query Board Info queryboard
i2c0 i2c0 commands i2c0
i2c1 i2c1 commands i2c1
adm adm commands adm
env env commands env
uicread uicread uicread
ienable ienable ienable
macread macread macread
macrestore macrestore macrestore
rxtest rxtest rxtest
drxtest drxtest drxtest
txtest txtest txtest
dtxtest dtxtest dtxtest
rcvmacon rcvmacon rcvmacon
telnet telnet telnet
netstat netstat netstat
ping ping ping
arp arp arp
ifconfig ifconfig ifconfig
traceroute traceroute traceroute
route route route
getimg getimg getimg
ibfl IB Flash Uitlity ibfl
baz Baz Switch Commands baz
norf NOR Flash Utility norf
build Build Info Utility build
board Board Info Utility board
info Board Info Utility board
crc32 Display CRC32 crc32 addr length [seed]
chkimg Check validity of SymmK O chkimg [addr]
testsyslog testsyslog testsyslog
testibsw testibsw testibsw
testipaddr testipaddr testipaddr
testmacaddr testmacaddr testmacaddr
sheapmem sheapmem sheapmem
rtcdate rtcdate rtcdate HrMnSc MmDdYr (in BCD)
showif showif showif
incoming_fw check/restart incming fir incoming_fw [start]
_ibswbinapi check/restart env bin api _ibswbinapi [start]
burnbazfw burnbazfw [auto] auto will do getimg and burn baz fw
burnswitchos burnswitchos [auto] auto will do getimg and burn switchos
tcpdump tcpdump tcpdump
eint eint
ib_tunnel ib_tunnel IB Tunnel statistics and debugging control
set_all_arp set_all_arp set_all_arp
Switch-B(4)>
